Wood Designer forum
Need help whit my design|Page 3|Forum|WOOD DESIGNER
Home
Hi
Wonders if steps be cut out where it comes poles?
Does anyone have pictures how they do milling in stringers, thinking especially on corners, tips or tricks for best results.
And what sander people use to design or sharpening of stringers?
October 4, 2012
Offline
Hi Reodor,
Can you send me an example ?
All the best,
Ness
Hi
Now I have printed the drawings, but looks like they do not vote in the longitudinal direction?
When this was written out so I get some small routes?
October 4, 2012
Offline
Hi Reodor,
Not sure what you mean, but if you mean, how to cut the step housings into the strings.
Have a look at the eBook How to “Make a Routing Guide” in the members library here :
https://wooddesigner.org/membe…..airs/core/
All the best,
Ness
Hi Ness
Do you have a simple method and cut into steps in the cheeks?
Certainly some pictures if you have.
October 4, 2012
Offline
If Draftsight shows the printer in the printer list it should print normally.
To test, try to print to another printer.
If you can print to a PDF printer like PDF Creator you can try to print the plan from Adobe or another pdf program.
If you can’t get Draftsight to print to an installed printer there’s something wrong with the configuration of the printer within windows. I can’t really help with this, you might have to ask someone to have a look at your computer, unless some on the forum has come across this problem and can help.
good luck,
Ness
October 4, 2012
Offline
Hi again,
Have you installed the printer drivers?
does not look like the program will find the printer,
Print error..
1 Guest(s)
