Wood Designer forum
StairFile Lite|Forum|WOOD DESIGNER
Home
October 4, 2012
Offline
Oh yes, sorry about that,
All the best,
Ness
November 15, 2014
Offline
Hi Ness
think you forgot to attach the file…….
Regards Torkild
October 4, 2012
Offline
Hi Torkild,
Here is your StairFile .
Good luck with the building.
Keep us updated on your progress.
All the best,
Ness
November 15, 2014
Offline
sorry, that was just adding up the mesurements in the pdf, looking at the parameters for the stairs it looks correct.
then thats what we are going for.
best regards Torkild
November 15, 2014
Offline
Hi,
That looks fine, only thing is the overall measurement on the lower stringboard turns out 1720mm max is 1700mm
best reg T
October 4, 2012
Offline
Hi again,
You might find this stair works better:
All the best,
Ness
November 15, 2014
Offline
forgot, righthand side of stairs is wall and only 1700mm wide, (a door is limiting the size)
best reg T
November 15, 2014
Offline
Hi,
newels squared, handrail reduced, risers set to 0 penetration, the upper floor will give the last step due to limited space.
reg Torkild
October 4, 2012
Offline
Hi again,
Looking at your stair I would suggest that :
– you give the sizes on the right of the stair which i presume is the stair well wall.
– if possible you add a small landing step even if it’s only step overlap to make the junction with the landing
– you make the posts square
– you change the riser penetration to 15
– make string to newel penetration 0
– that you reduce handrail width
There are a few other points that will need sorting out too to make this project coherent.
I would strongly suggest that you buy a StairFile Pro so that I can give your project a complete review and send you workable stair.
All the best,
Ness
November 15, 2014
Offline
Sorry really imbaressing, uploaded the wrong file! (fliped the inside and outside extreme measurements) and now with newels.
Its has to be an open staircase so therefor no risers needed
No landing step is correct.
I know this starcase is on the limit towards the stairrule but it will work according to my expearience. Room is oly 1700x1900mm
best regards Torkild
1 Guest(s)
