Wood Designer forum
new staircase design|Page 3|Forum|WOOD DESIGNER
Home
October 4, 2012
Offline
Hi Steve,
Your sketches don’t seem to have come through, have you forgot to attach them ?
If you have problems don’t hesitate to contact Stefan.
All the best,
Ness
Hi Ness,
I have attached sketches of the existing and proposed stair. I have also sketched the space avaiable
I will send details of the sections I have in the morning. I will try to sort out some photos.
I also now have autocad.
Thank you for your assistance.
Kind regards
Steve
October 4, 2012
Offline
Hi Stephen,
Thanks for upgrading to full membership and posting your project.
To be sure I get the full and correct picture of your project, can you upload a sketch of the stair well and eventually some photos?
A picture is worth a thousand words………and a million words in our job!
If you can also upload the StairDesigner files even if it’s not exact it will give me an idea of the wood sections you’ll be using.
All the best,
Ness
Hi,
I have just upgraded my membership and wonder if you could help me with the designing a stair case consisting of 13 steps please.
Starting in the hall with one step up onto a square landing then a 90 degree turn to the left with a flight of 9 steps up to a landing and then a 90 degree turn to the left and up two steps to the main landing floor with a wall on the right. . The main landing height from the hall floor is 266cm and available horizantal space in the hall is 360cm. The stairs have a wall to the right touching the first landing and the main flight and top landing. The top landing and last flight also touch a wall at right angles to the other.
The treads would go over the string on the left.
I hope this makes sense.
I have tried to modify the landing template, but I have yet to make much progress.
Kind regards
Steve
1 Guest(s)
