WOOD DESIGNER - Forum: StairDesigner https://wooddesigner.org/forum/stairdesigner/ Simple:Press Version 6.10.9 Alex on Is there a way to configure the default settings for treads and risers regarding dimensions? https://wooddesigner.org/forum/stairdesigner/is-there-a-way-to-configure-the-default-settings-for-treads-and-risers-regarding-dimensions/#p12767 StairDesigner https://wooddesigner.org/forum/stairdesigner/is-there-a-way-to-configure-the-default-settings-for-treads-and-risers-regarding-dimensions/#p12767 Hi,

Can you send your Stair and output file for better analysis, like this I can compare with my output 

Which output are you using?

For noising you have 2 setting from your stair and from PP

Noising.pngImage Enlarger

Cheers, Alex

]]> Fri, 09 Aug 2024 10:57:13 +0100 Yohaan Chandra on Is there a way to configure the default settings for treads and risers regarding dimensions? https://wooddesigner.org/forum/stairdesigner/is-there-a-way-to-configure-the-default-settings-for-treads-and-risers-regarding-dimensions/#p12764 StairDesigner https://wooddesigner.org/forum/stairdesigner/is-there-a-way-to-configure-the-default-settings-for-treads-and-risers-regarding-dimensions/#p12764 We build stairs differently in New Zealand compared to the UK and one of the main problems we run into is the wrong tread sizing. i will attach photos for reference.
our treads stop at the start of a riser ( refer to red line drawing in photo 1 ) and stair designer only gives us tread dimensions of the black line ( please refer to photo 1 ).

so each time we cut out or treads we have to manually calculate the real tread size as most of our stairs are carpet grade and we allow 25mm for nosing and have made mistakes in doing so which cost us alot of money and time.

i am looking for a solution for this, maybe there is a way to customise the method of stairmaking so we can remove the manual calculation out of the equation and follow a cutlist exactly.

i also have taken a look at each individual step to check the dimensions given and those also do not align with how we make the stairs.

Screenshot-2024-04-19-144403-4.pngImage Enlarger

Screenshot-2024-08-09-114334-1-1.jpgImage Enlarger

]]> Fri, 09 Aug 2024 00:49:55 +0100 Mario Audisho on balustrade https://wooddesigner.org/forum/stairdesigner/balustrade/#p12703 StairDesigner https://wooddesigner.org/forum/stairdesigner/balustrade/#p12703  Great Thanks Michel 

]]> Tue, 23 Jul 2024 11:28:29 +0100 Michel on balustrade https://wooddesigner.org/forum/stairdesigner/balustrade/#p12701 StairDesigner https://wooddesigner.org/forum/stairdesigner/balustrade/#p12701 Hi Mario,

 

Please read this article. It explains in detail how to do this.

 

https://wooddesigner.org/help-.....-railings/

 

regards

Michel 

]]> Tue, 23 Jul 2024 09:05:22 +0100 Michel on Can someone explain or show how to only fit 2 winding steps on this staircase https://wooddesigner.org/forum/stairdesigner/can-someone-explain-or-show-how-to-only-fit-2-winding-steps-on-this-staircase/#p12700 StairDesigner https://wooddesigner.org/forum/stairdesigner/can-someone-explain-or-show-how-to-only-fit-2-winding-steps-on-this-staircase/#p12700 Hi Yohaan,

 

Instead of adding a second flight, you must add consecutive landings and a flight at the end. You can shape the landings to represent a 2 step winder. It requires a bit of manual work 

 

Here is the stair example attached. 

 

If you are unable to open the file, please upgrade your software to the latest version on our website.

 

Regards

Michel 

]]> Tue, 23 Jul 2024 09:00:50 +0100 Mario Audisho on balustrade https://wooddesigner.org/forum/stairdesigner/balustrade/#p12695 StairDesigner https://wooddesigner.org/forum/stairdesigner/balustrade/#p12695 Hi there 

can some explain how to draw the rest of balustrade  so it can be presented to the customer please? cheers final-design2.pngImage Enlarger

]]> Sun, 21 Jul 2024 19:35:03 +0100 Yohaan Chandra on Can someone explain or show how to only fit 2 winding steps on this staircase https://wooddesigner.org/forum/stairdesigner/can-someone-explain-or-show-how-to-only-fit-2-winding-steps-on-this-staircase/#p12692 StairDesigner https://wooddesigner.org/forum/stairdesigner/can-someone-explain-or-show-how-to-only-fit-2-winding-steps-on-this-staircase/#p12692 Is anyone able to explain or show me how to fit 2 winding steps onto the following project, instead of there being 4 winding step (if possible, with the given parameters) Screenshot-2024-07-17-150155.pngImage Enlarger

 

Thanks

]]> Thu, 18 Jul 2024 09:54:29 +0100 Alex on Request for StairFile https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-1/#p12678 StairDesigner https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-1/#p12678 Hi,

Sure please find attached in inches Decimal and Fractional

Cheers, Alex

]]> Tue, 16 Jul 2024 11:10:05 +0100 Jessica Kalbermatter on Request for StairFile https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-1/#p12675 StairDesigner https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-1/#p12675 Hi Alex, Thank you for the quick reply! 

Could I actually get the StairFile dimensions in inches instead of mm?

Thanks

]]> Tue, 16 Jul 2024 04:16:34 +0100 Alex on request for stairfile https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-2/#p12674 StairDesigner https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-2/#p12674 DXF-2D folder in part to part, but required CAD software to take dimension,

 

Cheers, Alex 

]]> Mon, 15 Jul 2024 15:12:04 +0100 Stephen Vis on request for stairfile https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-2/#p12673 StairDesigner https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-2/#p12673 Thanks! Perfect

 

Do you know in which file the step dimensions in the side stringer are best visible 

]]> Mon, 15 Jul 2024 13:16:29 +0100 Alex on request for stairfile https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-2/#p12671 StairDesigner https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-2/#p12671 Hi again,

Please find your stairFile attache

What you see and measure is the contact surface.

front-view.pngImage Enlarger

cheers, Alex

]]> Mon, 15 Jul 2024 12:01:51 +0100 Alex on extending first 2 treads https://wooddesigner.org/forum/stairdesigner/extending-first-2-treads/#p12670 StairDesigner https://wooddesigner.org/forum/stairdesigner/extending-first-2-treads/#p12670 Hi,

This can't be done from Stairdesigner

]]> Mon, 15 Jul 2024 11:48:48 +0100 Stephen Vis on request for stairfile https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-2/#p12669 StairDesigner https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-2/#p12669 Screenshot-2024-07-15-123901.pngImage Enlarger

 

The risers are 30mm thick. Why is the measurement tool so off? And why are there multiple planes? 

]]> Mon, 15 Jul 2024 11:45:29 +0100 Stephen Vis on request for stairfile https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-2/#p12667 StairDesigner https://wooddesigner.org/forum/stairdesigner/request-for-stairfile-2/#p12667 Yes please

Will follow up on the question

]]> Mon, 15 Jul 2024 11:36:50 +0100