StairDesigner CNC integration guides | WOOD DESIGNER https://wooddesigner.org/help-categories/stairdesigner-cnc-integration/ Sun, 11 Aug 2024 09:34:57 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.2 https://wooddesigner.org/wp-content/uploads/2020/07/wooddesigner-icon-512-100x100.png StairDesigner CNC integration guides | WOOD DESIGNER https://wooddesigner.org/help-categories/stairdesigner-cnc-integration/ 32 32 How to combine StairDesigner with your CNC machine https://wooddesigner.org/help-centre/stairdesigner-cnc-integration/ Sun, 07 Feb 2021 06:39:04 +0000 https://wooddesigner.org/?post_type=ht_kb&p=18761 If you manufacture with a CNC machine, or are planning to, compatibility of our design software with your router is often going to be the first question in your mind. StairDesigner will integrate with virtually any CNC machine You may be using a pod and rail CNC as shown above, or a nesting machine. StairDesigner…

The post How to combine StairDesigner with your CNC machine appeared first on WOOD DESIGNER.

]]> Point to point versus nesting CNC machines https://wooddesigner.org/help-centre/point-to-point-versus-nesting-cnc-machines/ Thu, 04 Feb 2021 19:37:03 +0000 https://wooddesigner.org/?post_type=ht_kb&p=18981 Which is going to be best for your workshop, and recommended software configurations for each. PolyBoard acts as the design tool and starting point for both configurations but the production process is different. (we are focusing here on furniture manufacture using PolyBoard with your CNC, but the same set up applies for stair design with…

The post Point to point versus nesting CNC machines appeared first on WOOD DESIGNER.

]]> Direkt NC-HOPS integration with PolyBoard and StairDesigner https://wooddesigner.org/help-centre/nc-hops-integration-polyboard-stairdesigner/ Wed, 03 Feb 2021 17:44:31 +0000 https://wooddesigner.org/?post_type=ht_kb&p=18977 Our software combines with virtually any CAM package and CNC machine type. That covers NC-HOPS as well, a powerful CAM software that is itself compatible with most machines. Almost all of our cnc machines are Holzher brand and we are very pleased with PolyBoard’s ability to integrate with NC-HOPS…PolyBoard adds a lot of valuable information…

The post Direkt NC-HOPS integration with PolyBoard and StairDesigner appeared first on WOOD DESIGNER.

]]> VCarve integration with PolyBoard and StairDesigner https://wooddesigner.org/help-centre/vcarve-integration-with-polyboard-and-stairdesigner/ Wed, 27 Jan 2021 07:28:33 +0000 https://wooddesigner.org/?post_type=ht_kb&p=18794 Here we focus on VCarve, but the same integration applies to Aspire (both developed by the same company). Update: we have now partnered with Vectric so you can buy VCarve Pro direct from us, either on its own, with any of our other software packages, or already set up with our CNCs. Click here for…

The post VCarve integration with PolyBoard and StairDesigner appeared first on WOOD DESIGNER.

]]> Alphacam integration with PolyBoard and StairDesigner https://wooddesigner.org/help-centre/alphacam-integration-polyboard-stairdesigner/ Wed, 27 Jan 2021 06:55:12 +0000 https://wooddesigner.org/?post_type=ht_kb&p=18783 Our software integrates with pretty much all CAM software and CNCs. That includes Alphacam, one of the best known and powerful CAM solutions available. If you’re running Alphacam on your CNC, here are two videos that show you how easy it is to take the PolyBoard or StairDesigner output and automate the tool path creation.…

The post Alphacam integration with PolyBoard and StairDesigner appeared first on WOOD DESIGNER.

]]>