1) Depending on what application you are trying to achieve. You can use drawers to make a draw box and edit that for the perpendicular panels you are after. There are also some other options, depending on exactly what you are trying to achieve.

Please refer to attached image. I created this through making a drawer. I created a drawer that was set down 10mm from the top of the zone (see hardware link in previous post). I then used the surface split (see link in question 2: Panel Design) to split the sides and I added a shelf as a bottom piece for the top drawer space.

2) Have a look at the link for Panel Design. This will show you some options for doors. If I understand you correctly, I believe the Thickness Split should help you here. Most manufacturers would be able to edge both boards as one for you. I would just mention this to your manufacturers.

3) There is no option for adding custom mouldings at this point in time. I recommend using another software to add a moulding after design or getting this action completed at manufacture.

Regards,

Isaac

Do you have any tutorial about doors: 
1) how to attach left/right board, if it is possible to attach a panel to the door perpendicularly
2) how to create custom doors - one OSB as a base/background, and other OSB with custom shape attached parallel to the first board, and edging done on both boards as a one edge? - can I order this kind of edging in CNC production? or edging in this case should be done by me as a manual job?  
3) how to add custom mouldings to doors, and boards if possible

Thanks for this last advice

I have had a look at Blum hardware and I am not sure if they have a range to cover this type of action.

My recommendation is to contact a Blum sales rep. and speak to them about what products they have that could meet your needs. Additionally, Hafele or Hettich might have options that you could use.

When you find an appropriate hardware I will be able to help you apply it to your cabinet in PolyBoard. Without it I won't have any specifications to work off of, thus I will not know how to apply the components.

I will add three links to some websites that may be helpful:

Blum

Hettich

Hafele

Sorry that I can not help any more. If I come across anything that might work I will let you know.

Regards,

Isaac

Can you please advice about the bottom doors - what hardware should be added to achieve max opening of  45 degrees? any tutorial how to attach left and right board to doors? I have added small hand drawing, hope can explain better my idea.

Summary of questions: 
1) one-click opening hardware from Blum - which one do you recommend will work the best? any additional settings I should think about for integrated doors?
2.1) how to attach the box of not standard shape to doors  (2.2) back of the box is one part, sides of the box are made of 2 separated parts, no floor/bottom in the box)
3) hardware for 45 degrees opening
4) hardware for soft close 

Thanks in advance.,

Please see the video, I have run through your questions here:

Furthermore, please see the following link for information on manufacturing methods:

Manufacturing methods

Also, see the final link for information on creating and applying hardware:

Hardware

Let me know when you are finished and need the machining files, and if you need any more help.

Regards,

Isaac

I need to plan cam locks, hooks that will allow the cabinet to be attached directly to the wall, hinges, one-click drawers - soft close - preferably Blum, or any reasonable equivalent, as well as lower doors that are attached to the lower shelf, both doors should open a maximum of 45 degrees. Then I would like to send the entire project to the CNC order. Please advise what I can do next with the project. I will appreciate your help

. 

Here your drawers methods use drawers legrabox with only drawers back and bottom,

We only offer screen sharing in exceptional cases and/or we also need to see your configurations.

Drawer configurations require more explanation than can be given in a simple troubleshooting session that could not exceed 15 minutes.

As a first step, I recommend that you consult these two links

https://wooddesigner.org/help-.....braries-2/

and 

https://wooddesigner.org/help-.....g-methods/

If you need more help by shared screen we can propose 4hr support pack

Cheers, Alex

I am still new with polyboard, still learning. I will attach a file with a cabinet I built, can you look at it see what you would do different. Why are there no sides on the drawers? Maybe it would be better doing a screen share about how to setup a drawer slider? Any ideas would be very helpful.

Thank Luke

Thanks for the video!

Alex

got this working lovely, thanks again.

https://www.instagram.com/reel.....BiNWFlZA==

Have you well install you Quick Design libraries? 

with them, you'll get a host of presets

and don't forget to take a look here

>https://wooddesigner.org/help-.....ssentials/

especially

>https://wooddesigner.org/help-.....libraries/

and 

>https://wooddesigner.org/help-.....g-methods/

Cheers, Alex

this is all new to me so I just might be keeping you busy!

This not correct!

When your door is applied mode you should use APP hinges (like Blum/hing75T159-X00/app/ol 14-18) , and when your door is built-in select BIN hinges (Blum/hing75T179-X00/bin/sl 1.5-3)

beaucaus in case of Blut-in or Applied doors Overpassing switch between door and side

Cheers, Alex

I am doing some testing with hinges and doors, top is built in and bottom is applied globally.

Both are working well but the built in has the hinge in the opposite way, is this correct?

Thanks, Paul.

Yes in this case you don't have choice to add shelves after

Cheers, Alex