WOOD DESIGNER - Forum: OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/ Simple:Press Version 6.10.9 Isaac on shape of the part on the label https://wooddesigner.org/forum/opticut-optinest/shape-of-the-part-on-the-label/#p12856 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/shape-of-the-part-on-the-label/#p12856 No worries,

There is no option to do this in OptiCut.

Regards,

Isaac

]]> Fri, 20 Sep 2024 13:07:38 +0100 Blaž Jašovec on shape of the part on the label https://wooddesigner.org/forum/opticut-optinest/shape-of-the-part-on-the-label/#p12855 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/shape-of-the-part-on-the-label/#p12855 I am very sorry i ment if it is posible in opticut

]]> Fri, 20 Sep 2024 12:56:59 +0100 Isaac on shape of the part on the label https://wooddesigner.org/forum/opticut-optinest/shape-of-the-part-on-the-label/#p12854 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/shape-of-the-part-on-the-label/#p12854 Hi Blaz,

See the attached video. Also, I recommend making sure you have the latest version downloaded.

Regards,

Isaac

]]> Fri, 20 Sep 2024 12:47:19 +0100 Blaž Jašovec on shape of the part on the label https://wooddesigner.org/forum/opticut-optinest/shape-of-the-part-on-the-label/#p12853 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/shape-of-the-part-on-the-label/#p12853 HELLO 

 

Is there a posibility to draw the part shape on the label in optinest?

]]> Fri, 20 Sep 2024 12:33:40 +0100 Isaac on Nesting optimization not capturing all panels. https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12811 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12811 Hi Keith,

Find a video attached answering your latest question.

Let me know if there is anything else I can help with.

Regards,

Isaac

]]> Mon, 02 Sep 2024 09:51:31 +0100 Keith Shelley on Nesting optimization not capturing all panels. https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12810 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12810 Thank you Isaac, 

 

Video makes sense and is very helpful, I'm wondering however is there a way to view only the panels that did not optimise after optimisation is complete. 

]]> Sat, 31 Aug 2024 11:07:09 +0100 Isaac on Nesting optimization not capturing all panels. https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12803 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12803 Keith,

See the attached video.

Regards,
Isaac

]]> Fri, 23 Aug 2024 13:51:33 +0100 Isaac on Nesting optimization not capturing all panels. https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12801 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12801 Keith,

This seems to be a problem, we are working on getting this rectified.

Regards,

Isaac

]]> Fri, 23 Aug 2024 10:06:44 +0100 Isaac on Nesting optimization not capturing all panels. https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12800 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12800 Hi Keith,

I am looking into this now.

I will reply soon.

Regards,

Isaac

]]> Fri, 23 Aug 2024 09:32:13 +0100 Keith Shelley on Nesting optimization not capturing all panels. https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12799 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12799 Hi Again, 

 

So just a quick update. 

My material sheet size is 1220 x 2440. I had one component which was 600 x 2500 ( bigger than the sheet). Although all components were transferring into optinest good it would not optimise any of that size material that was the same as the oversized panel. 

I would of thought it would of just left the over sized panel out as opposed to all components in that material description. 

When I exported into optinest, I just deleted the larger panel prior to optimising and it worked for me then. 

 

Should I have done something different ??

or

Am I missing a key setup or step in optinest ??

 

Thank you again. 

]]> Thu, 22 Aug 2024 22:36:02 +0100 Keith Shelley on Nesting optimization not capturing all panels. https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12798 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/nesting-optimization-not-capturing-all-panels/#p12798 Hello Guys, 

 

I have a unit Drawn and sent to optinest for outputting into Vcarve. 

 

So I have done projects with all the materials involved before and managed ok. So they should be in my optinest library.  

 

Problem is when I nest our optimise its not nesting all parts. for some reason. I see the individual components within the file when I save it I can also see them in the parts list but they wont optimise for some reason. Panels are in optinest and the qty is set to unlimited. 

 

I have tried to attached the polyboard file for reference however its says its to large apolagies.  

 

Thanks in advance 

Keith.  

]]> Thu, 22 Aug 2024 19:40:39 +0100 Keith Shelley on Company Logo on Optinest label https://wooddesigner.org/forum/opticut-optinest/company-logo-on-optinest-label/#p12797 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/company-logo-on-optinest-label/#p12797 Hello Michel, 

 

Thank you for your reply and info. 

 

Chat soon. 

]]> Thu, 22 Aug 2024 19:25:46 +0100 Isaac on Add parts to Off-cut https://wooddesigner.org/forum/opticut-optinest/add-parts-to-off-cut/#p12756 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/add-parts-to-off-cut/#p12756 Hello Zaheer,

In OptiCut you need to re-optimize if you wish to add additional parts to an optimization.

Regards,

Isaac

]]> Mon, 05 Aug 2024 11:13:26 +0100 Alex on Move feature https://wooddesigner.org/forum/opticut-optinest/move-feature/#p12755 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/move-feature/#p12755 Hi,

no, that's not possible, in fact that's the whole point of optimisation software,

However, if you can tell us what you want to do and why, we might be able to offer you a compromise.

Kind regards, Alex

]]> Mon, 05 Aug 2024 10:38:11 +0100 Zaheer Abbas on Add parts to Off-cut https://wooddesigner.org/forum/opticut-optinest/add-parts-to-off-cut/#p12754 OptiCut and OptiNest https://wooddesigner.org/forum/opticut-optinest/add-parts-to-off-cut/#p12754 Hello,

In opticut can i add new parts to my off-cut without the need to reoptimize everything?

]]> Mon, 05 Aug 2024 10:30:09 +0100