WOOD DESIGNER - Forum: PolyBoard https://wooddesigner.org/forum/polyboard/ Simple:Press Version 6.10.9 Vicky Hope on fittings https://wooddesigner.org/forum/polyboard/fittings-2/#p12857 PolyBoard https://wooddesigner.org/forum/polyboard/fittings-2/#p12857 that worked!!! thanks, been scratching our heads for ages trying to work it out

]]>
Fri, 20 Sep 2024 13:13:05 +0100
Isaac on fittings https://wooddesigner.org/forum/polyboard/fittings-2/#p12852 PolyBoard https://wooddesigner.org/forum/polyboard/fittings-2/#p12852 Hi Vicky,

See the attached video. Is this what you are asking?

Regards,

Isaac

]]>
Fri, 20 Sep 2024 08:23:16 +0100
Vicky Hope on fittings https://wooddesigner.org/forum/polyboard/fittings-2/#p12851 PolyBoard https://wooddesigner.org/forum/polyboard/fittings-2/#p12851 hello can anyone help us

our screw and cabinet fixings are set with the front and back of our upright, so every time we set a top/base or fixed shelf back from the front of our upright the fixing is visible.

is there away of setting our pre-sets so the fixings move with the top, base and fixed shelf?

]]>
Thu, 19 Sep 2024 15:28:49 +0100
Alex on Texture orientation https://wooddesigner.org/forum/polyboard/texture-orientation/#p12850 PolyBoard https://wooddesigner.org/forum/polyboard/texture-orientation/#p12850 You can make 90°display rotation, from menu Tools > Preferences > Panels tabs

Display-ori.pngImage Enlarger

But you can't switch them

Cheers, Alex

]]>
Thu, 19 Sep 2024 15:21:30 +0100
Blaž Jašovec on Texture orientation https://wooddesigner.org/forum/polyboard/texture-orientation/#p12849 PolyBoard https://wooddesigner.org/forum/polyboard/texture-orientation/#p12849 Thank you

The problem was that i had panels in opticut saved so that the widht of the panel was the lenght (2800mm) and not the hight like you shown

It is a bit awkward fore me because i use the hight=2070 an width= 2800mm

Is there an option to switch this two parameters ?

]]>
Thu, 19 Sep 2024 15:09:39 +0100
Alex on Texture orientation https://wooddesigner.org/forum/polyboard/texture-orientation/#p12848 PolyBoard https://wooddesigner.org/forum/polyboard/texture-orientation/#p12848 Hi,

Sorry for my english hope my explain is quite clear,

All the best, Alex

]]>
Thu, 19 Sep 2024 14:30:15 +0100
Blaž Jašovec on Texture orientation https://wooddesigner.org/forum/polyboard/texture-orientation/#p12847 PolyBoard https://wooddesigner.org/forum/polyboard/texture-orientation/#p12847 Hello 

I have a problem positioning the texture in polyboard and opticut

When the orientation is along the hight of the cabinet in polyboard  i get the wrong orientation in opticut. The part is orientated along the hight of the stock panel not along the lenght like it should be.

I have tried changing the orientation of the texture in the material library, but then i have to orientate the texture on the cabinet along the width of the cabinet not the hight witch is also not corect. This solves the problem in opticut.

Is there a way to fix this an so that it is orientated corectly?

]]>
Thu, 19 Sep 2024 13:48:51 +0100
Alex on Missing end panels (updated to 7.12d) https://wooddesigner.org/forum/polyboard/missing-end-panels-updated-to-7-12d/#p12846 PolyBoard https://wooddesigner.org/forum/polyboard/missing-end-panels-updated-to-7-12d/#p12846 Hi Connor,

It is possible that with the update issues that were tolerated are no longer tolerated, because this cause issues during CN export.

Can you select your side from properties menu, then control and adjust your inner tooling

prop.pngImage Enlarger

in this case the software protects itself to avoid crashing,

]]>
Thu, 19 Sep 2024 12:54:23 +0100
MITC on Hardware Packs https://wooddesigner.org/forum/polyboard/hardware-packs/#p12845 PolyBoard https://wooddesigner.org/forum/polyboard/hardware-packs/#p12845 Thanks,

That makes loads of sense.

J

]]>
Thu, 19 Sep 2024 12:50:14 +0100
Alex on Hardware Packs https://wooddesigner.org/forum/polyboard/hardware-packs/#p12844 PolyBoard https://wooddesigner.org/forum/polyboard/hardware-packs/#p12844 Hi,

In order to make this more readable, we now indicate the standard overlap value of the box as it is registered with the hardware supplier

"D" for blum, "B" for hettich, "K" for Grass and Salice , In the absence of this information, the recovery value of the min-max value will be indicated. ( rec / ol )

This value is the fixed overlaps value from inner side, (this value is always provided in use with 0mm Baseplate!)

Hinges-1.pngImage Enlarger

X / I is the type of baseplate crossed or inline, and the value 0X is the thickness of the baseplate

All the best, Alex

]]>
Thu, 19 Sep 2024 12:17:31 +0100
Isaac on Missing end panels (updated to 7.12d) https://wooddesigner.org/forum/polyboard/missing-end-panels-updated-to-7-12d/#p12843 PolyBoard https://wooddesigner.org/forum/polyboard/missing-end-panels-updated-to-7-12d/#p12843 Hi Connor,

I am investigating this for you.

I will try and have a response for you soon.

Regards,

Isaac

]]>
Thu, 19 Sep 2024 12:13:26 +0100
MITC on Hardware Packs https://wooddesigner.org/forum/polyboard/hardware-packs/#p12842 PolyBoard https://wooddesigner.org/forum/polyboard/hardware-packs/#p12842 Thanks, that is a great help.

It still doesn't explain the X** value unless I am misreading the document, I am also unsure what the D11 value at the end means and how it relates to the geometry.

]]>
Thu, 19 Sep 2024 09:45:12 +0100
Andy Brown on Quick Design Library https://wooddesigner.org/forum/polyboard/quick-design-library-1/#p12841 PolyBoard https://wooddesigner.org/forum/polyboard/quick-design-library-1/#p12841 Hi Isaac, that's perfect thank you, just didn't know how to get into the structure part.

 

Thanks

]]>
Thu, 19 Sep 2024 09:36:57 +0100
Connor on Missing end panels (updated to 7.12d) https://wooddesigner.org/forum/polyboard/missing-end-panels-updated-to-7-12d/#p12840 PolyBoard https://wooddesigner.org/forum/polyboard/missing-end-panels-updated-to-7-12d/#p12840 I've just updated to 7.12d version and some of my files are missing the left side panel!
See attached example file. Can you let me know how to get the end panel back please!

end-panel-missing.pngImage Enlarger

]]>
Thu, 19 Sep 2024 09:22:48 +0100
Isaac on Hardware Packs https://wooddesigner.org/forum/polyboard/hardware-packs/#p12839 PolyBoard https://wooddesigner.org/forum/polyboard/hardware-packs/#p12839 Good morning,

In your Quick Design Libraries you will find a folder called Guides.

This contains a document called PolyBoard Quick Design libraries manual.

This should contain the information you are after. I have also attached this document here.

Regards,

Isaac

]]>
Thu, 19 Sep 2024 09:15:13 +0100